Only Used on RHD cars in conjuction with one "Dog Legged Rod" You may also require a Cable End Guide Part No 1111 and a RHD Cable End Part No 1106 and or a Clevis End Part No 2002. Outer thread size is 8mm and inner is 2BA. If this 2BA nut was not suppiled with the cable M5 will fit but is quite loose.
Note It may be necessary to dress the swaging on the threaded cable ends in order to pass through the essentail cable guide Part No1111. Lubricated lightly with oil and the cable ends and cable guide with grease.
Cable Gear Change RHD 105010
- Product Code: 1066
- Availability: In Stock
-
£40.00
Related Products
Cable Guide RHD Gear Change
Essential part of the RHD Gear Change Cable Part No 1066 as it stops the Bowden cable bunching unde..
£9.00
Gear Change Spring Bracket RHD Car only
This is the little bracket that fits to the chassis mount locating the spring for the cable that ope..
£1.50
Cable End RHD
Clevis / Yoke end for the RHD gearchange cable. Fitted normally to the linkage on Firewall /Bulkhead..
£14.50
Gear Change Linkage Bracket on Bulkhead RHD
Linkage inside engine bay on the bulkhead. RHD Car Only..
£29.80
Gear Lever Return Spring RHD
Return spring located on the RHD Gear change cable situated on the gearbox and connected to the Bra..
£2.45