Profiled Rubber Seal between the Body and the Chassis. You will need to trim for the Steering Box etc with a craft knife. Length is approx 780mm. This profile will need to be trimmed for the chassis and the pedal box. To aid this we suggest you use these measurements as guide. LDH Cars looking into the car on the drivers side cut/trim on the small tube side of the profile 50mm long x 9mm wide to miss the chassis corner plate. From the same end position measure  along 110mm and cut/trim 100mm long x 17mm wide to miss the chassis pedal box. On opposite side of the chassis cut/trim on the small tube side of the profile 48mm long x 9mm wide to miss the other chasssis corner plate. These measurements are taken from an original profile and we would suggest you use the above as a guide only as each car maybe slightly different. For RHD drive cars just reverse these instructions.